As a structure primarily used outdoors, a canopy is ideal for keeping your people and your assets out of bad weather - especially on days when the weather isn't so good. It also goes beyond that - by attaching the sides of the tent to your tent, you're adding an extra layer of protection to keep everything safe and dry.
Pop-up tents are great for a number of reasons. However, high winds usually throw a curveball when you try to erect a pop-up tent, and it can be annoying to try to put the side of the canopy down without any preparation.
In this blog, ShiningShow will explain how to stop the sides of the canopy from fluttering in the wind so that it's much less stressful when you use the tent on unpredictable days.
Can my tent withstand the wind?
It is important to know how to prevent your tent from being blown away by the wind. Despite being temporary structures, all tents manufactured by ShiningShow are designed to withstand normal to strong winds when properly secured. For example, our heavy-duty tents can withstand winds of up to 50-55mph.
As mentioned earlier, it is essential to protect your tents in windy conditions, otherwise you may expect them to tip over - potentially damaging your tent and the merchandise inside.
How to use a tent safely in windy conditions
The proper set-up process is key to how to stop the sides of your tent from flapping in windy conditions. Before setting up your shelter, you should always check the weather forecast to determine if it is safe to put it up in the first place.
If it is safe despite the wind, you should make sure you have an extra person to help set it up. The person helping you in this process should hold down the tent to make sure it doesn't get blown away by the wind - risking injury and damage.
You also need to make sure you have the most appropriate technology to protect the tent you have prepared.
How to secure the sides of your tent on different surfaces
Different types of flooring offer different advantages and disadvantages in harsh weather conditions, so the first thing you must consider when looking at how to protect your tent from the wind is what kind of surface you will be putting in place.
Grass and concrete are the two most common options you will have, and the methods for protecting the sides of your tent on these surfaces are essentially the same, which means you can use the same strategies for different events without any hassle.
Ideally, your tent needs a flat, even base surface to reduce the risk of any further complications. This is why concrete is usually the preferred choice. However, while grass is a less stable surface, its softer texture allows for more ways to protect your sidewalls.
How to use tools to protect your tent
Common methods of securing your tent from the wind include using leg weights, tie-down kits and tent connectors.
1、Using tent weights
One of the most reliable ways to secure your tent, leg weights are an excellent solution in windy conditions and can be used on many different surfaces - especially concrete and grass. We recommend using approximately 15-25 kg of weight on each leg to keep your tent sturdy.
ShiningShow's cast iron tents weigh between 12-30 kg and can be slid over the shelter's legs to secure them to the ground. Likewise, we offer sets of 4 and 6 sandbags - each weighing 8 kg - that clip onto each canopy leg to produce the same effect.
2、Using the Tie Kit
For use on strictly grass surfaces, tie-down kits are the way to go. To secure your canopy using one of the kits, you will need to push galvanized stakes into the ground a few meters away from each corner of the structure. You will then need to pass the heavy-duty camlock straps through the stakes and attach the hooks directly to the frame structure to fully secure them.
At ShiningShow, we offer tie-down kits that provide all the materials you need to secure even the sturdiest tents to the ground. We recommend using multiple tie-down kits per tent to keep your shelter sturdy.
3、Connecting to other tents
The advantage in numbers also applies to tents! By connecting two tents together, you not only reduce the weight of both structures, you also make the most of the available space. Suitable for all types of surfaces, you can use frame-to-frame tent connector clips or dual tent counterweights - both available from ShiningShow - to pair the two.
We recommend using two connector clips per leg to stabilize both tents. The unique "H" shape secures two side-by-side tent legs to the ground with dual counterweights.
Choose ShiningShow's Windproof Tents
At ShiningShow, our mission is to provide you with the highest quality tents and structures that offer superior quality and consistent durability, no matter what the weather. If you found this article on how to protect your tent from the wind useful, check out our selection of accessories and spare parts to help keep your shelter grounded.
If you're looking for more advice or information on using your tent in different conditions, the team at ShiningShow would be happy to help you. Contact us today and we'll get back to you as soon as possible!
